Eureka 7800 BrushRoll, How To Maintain, How to Replace Brush Roll Belt, Periodic Maintenance

Models: 7800 7600

1 16
Download 16 pages 37.12 Kb
Page 11
Image 11
HOW TO MAINTAIN

HOW TO MAINTAIN

The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the bag, belt, and brush roll often.

Brush Roll

The brush roll turns to brush and sweep the carpet. Remove hair and threads from the brush roll so it can continue to brush the carpet. To maintain the most efficient cleaning, the bristles must touch the carpet. To test the bristle length, hold a ruler against the underneath side of the cleaner. If the bristles no longer touch the ruler, replace the brush roll.

Brush Roll Belt

Pull

 

Pull

 

The brush roll belt turns the brush roll as the bristles sweep

 

 

 

 

 

 

 

and brush the carpet. Check the belt regularly to be sure

 

 

 

it is in good condition. Replace the belt if it stretches, cracks

 

 

 

or loses tension. Cut away any hair or threads wound

 

 

 

around the brush roll or the belt pulley because the buildup

 

 

 

 

 

 

could cause the belt to rotate unevenly.

 

 

 

 

 

 

 

 

 

 

How to Replace Brush Roll Belt

NOTE: Turn off the switch and unplug the electrical cord before replacing belt. Belt pulleys can become hot during normal use. To prevent injury, avoid touching the motor pulley when checking the belt.

CAUTION: Improper installation of the brush roll could cause carpet or cleaner damage.

Motor

Pulley

1.Turn the cleaner over. Pull up to remove bottom plate.

2.Lift out brush roll and discard old belt.

3.Fold new belt to slide it around the motor pulley.

4.Place belt around pulley end of brush roll.

5.Pull left end of brush roll down to stretch belt. Align the end cap with the base and push down to secure.

6. Seat right end cap.

7. Turn the brush roll until the belt centers onto the brush roll pulley.

8. Slant front of bottom plate to catch tabs into cleaner slots. Push down above each hook to snap into place.

Use GENUINE EUREKA replacement belt, 54312.

Look for the EUREKAGENUINEPRODUCT symbol. Brush Roll

For location of nearest Eureka

Warranty Station or Service Tabs information call 1-800-282-2886.

PERIODIC MAINTENANCE

BrushRoll

Brush Roll Belt

Slots

11

Page 11
Image 11
Eureka 7800 BrushRoll, How To Maintain, How to Replace Brush Roll Belt, Periodic Maintenance, Motor Pulley, Slots