Eureka 7600, 7800 PROBLEM SOLVING, PROBLEM CAUSE SOLUTION

Motor will not start. MElectric Plug MPush plug securely into outlet.
MTry another outlet.
MCheck circuit breaker.
Does not clean the carpet MDisposable Dust Bag MChange the bag. Hint: If picking up fine dust, the bag may
not look full but a fine substance tends to reduce suction
when it blocks the airflow through the paper bag.
MBelt MReplace a cut, loose or out of shape belt.
MBrush Roll MClean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
MHose MRemove any clogs from the hose that restrict the airflow.
MCarpet/Floor or Tools MPush selector switch back. This directs the suction to
Selector (7800 Series the carpet or floor.
only)
No suction at the end of MHose Converter (7600 MHose converter has to seat inside the attachment door.
the hose. Series only) Hint: Place converter notch to the back of the cleaner.
MCarpet/Floor or Tools MPush selector switch forward. This directs the suction
Selector (7800 Series only) to the hose and tools.
MDisposable Dust Bag MChange the bag. Hint: If picking up fine dust, the bag may
not look full, but a fine substance tends to reduce suction
when it blocks the airflow through the paper bag.
MHose MRemove any clogs from the hose that restrict the airflow.
Check both ends of the hose.
MAttachment Door or MRemove bottom plate and clean debris from the
Hose Connection on attachment door area or around the hose connection.
Base
Motor suddenly shuts off. MThermal Cut-Off MRefer to page 5.
Headlight not working. MLight Bulb MReplace light bulb.
Noise from the brush roll MBrush Roll MRemove bottom plate and clean debris from the brush
area. roll area.
MBelt MReplace a cut, loose or out of shape belt.
Cleaner is hard to push. MCleaner Height Setting MTurn adjustment knob to a higher position. Hint: Put
handle in operating position. Tilt the cleaner back to raise
the front wheels off floor. Then turn the knob.
MBelt MReplace a cut, loose and out of shape belt.
Brush roll will not turn. MBelt MReplace cut, loose or out of shape belt.
Burning smell. MBelt MReplace cut, loose or out of shape belt.
Cleaning height knob will MCleaner Height Setting MHint: Put handle in operating position. Tilt the cleaner
not turn. back to raise the front wheels off floor. Then turn the knob.
Missing parts. MCall 1-800-438-7352 between 8:00 a.m. and 4:45 p.m.
central standard time, Monday through Friday. Know the
model and serial number when you call.
Questions? MCall 1-800-282-2886, 7 a.m. to 8 p.m., central standard
time, Monday through Saturday. Know the model and
serial number when you call.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM CAUSE SOLUTION
3
12
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3