HOW TO MAINTAIN (continued)
NOTE: Turn off the switch and unplug the electrical cord before servicing the cleaner.
REPLACE BRUSH ROLL BELT
1
Remove the 10 screws on the bottom of the power nozzle. Flip the power nozzle back upright and remove the hood.
NOTE: The reset button cover (circled) is spring loaded so it may become displaced when you remove the hood. Keep track of reset button and spring.
2
Remove broken brush roll belt. Pinch new brush roll belt together and position new belt so teeth engage cog pulley on end of motor shaft.
3
Place the other end of belt around brush roll. Align left end of brush roll into the base by rotating slightly until brush roll end cap slides into place.
Cog |
Pulley |
Secure right end of brush roll into base.
4 | The brush roll belt is now installed. |
|
5
Make sure the reset button cover (circled) is in position on spring. Replace hood. Hold body and power nozzle, turn over so bottom of power nozzle is facing up. Replace screws.
Brush Roll
As the brush roll rotates, it sweeps and combs the carpet nap. Remove hair and threads from the brush roll so it continues brushing the carpet nap. Check brush roll occasion- ally for hair or string that may have wrapped around dowel. Remove with scissors.
When bristles have worn to about 1/4" in length, carpet cleaning effectiveness will be reduced. It is time to replace the brush roll. Follow the instructions in the brush roll belt section to open up the power nozzle and replace the brush roll.
11
