Eureka 790 Cord Retainer, Handle Collapse Button, Cord Storage Hooks, Reset Button, Reset Light

HOW TO USE

3 Cord Retainer

3CORD RETAINER

HANDLE

4COLLAPSE BUTTON

CORD

5STORAGE HOOKS

When preparing to use vacuum, firmly push the electrical cord down into the cord retainer. This will place the electrical cord out of the way while you vacuum.

4Handle Collapse Button

To collapse the handle from the upright position, press handle collapse button, rotate handle down until latch in hand grip locks onto the body.

6	HANDLE
	RELEASE	5 Cord Storage Hooks
	PEDAL
	RESET	This unit has two convenient
7		cord storage hooks attached
	BUTTON	to the handle. Wind the cord
		around the hooks and fasten
	RESET	the plug to the cord to prevent
8		unwinding.
	LIGHT

9REMOVABLE EXHAUST GRILLE

6 Handle Release Pedal

The handle release pedal is located next to the floor between the two wheels on the back of the cleaner. Step on the handle release pedal and pull back handle to find a comfortable operating position. Handle will automatically lock into storage position when handle is rotated into upright position.

7 Reset Button

This unit uses a cogged, non-stretch belt. If a large object causes the brush roll to jam, the brush roll motor shuts off and the Reset Light illuminates. Turn off and unplug the unit. Check the brush roll for debris and clean if needed. Press the reset button, plug in the unit and turn on to continue cleaning.

8 Reset Light

The reset light is a neon light that illuminates when the brush roll jams. See reset button above for actions to take when this light comes on.

9 Removable Exhaust Grille

Remove this exhaust grille to clean or replace filter. Refer to page 9.

6