Eureka AS2030A manual Easy 4 Step Assembly, Hose Retainer

Easy 4 Step Assembly

To view our “How to Assemble” demo, visit www.eureka.com/airspeed/assembly

	STEP
	1
	Fig. 1	Alternate View
B
	A	B
		A
Fig. 2
	B
	A

Fig 1: With the back- bone (B) loosely on the base (A), rotate the backbone forward until the vaccum is locked in the upright position. Fig 2: stand as shown and push down on backbone (B) valve to snap into place. Pull up to ensure the backbone has locked properly.

STEP	STEP	STEP
2	3	4

C

Hose Retainer

B

Align so that the hose	Put dust cup (D) into	To attach hose con-
retainer on the handle	place on base. Push	nector, align tabs
(C) is facing the vacuum	cup handle toward	and lower hose onto
front. Lower the handle	backbone (B) to snap	connector. Turn clock-
(C) onto the backbone	into place.	wise to lock.
(B). Push down to snap
into place. Pull up to
ensure the handle has
locked properly.

Hose and Tool Storage

C

Hose

Retainer

E

Route hose (E)

through hose

retainer on front

of handle (C).

E

Put hose end (E) into hook at base of tool clips. Then push hose into clips.

G

Slide crevice tool

(F)into top of extension wand end (G). Place

into clips on

the side of the

vacuum.

H

Store dusting brush (H) on back of vacuum.

I

On some models:

Attach turbo

nozzle (I) to clip on handle (C).