HOW TO ASSEMBLE AND USE
| k |
| |
Remote ON/OFF Selector | Carpet | Floor | |
for bare floor or carpet |
| ||
|
|
|
Carpet - push down on frontBare Off - middle position (on some models) Bare floor - push down on back
Vacuum Control
Cleaning suction is reduce by pushing lever 4 down to LOW position. Place lever at HIGH position to increase suction for carpet cleaning.
1. | Snap wands together. |
|
2. | Put wands into socket. |
|
3. | Push motorized nozzle plug into |
|
| retainer; secure cord in slot (see |
|
| Detail A). |
|
4. | Place |
|
| into wands until plug connects |
|
| and button locks. |
|
5. | Open the inlet cover and hold the | 1 |
| hose cuff so the power cord is |
opposite the cover.
a.Plug the hose into the inlet, or
b.Plug the hose into the inlet and connect the polarized plug to an outlet.
6.Step on motorized nozzle; pull back on handle.
7.Push on; select bare floor or carpet cleaning.
Power View®
Rotating brush roll could cause damage to bare floors. Be sure brush roll is stationary for bare floors;
turning for carpet.2 Refer to
Remote Bare Floor/Carpet Selector.
Headlight
k
7
NOTE:
Remote controls on
3
5a
5b
6
NOTE: Headlight turns on ONLY |
|
when brush roll is turning. | 5 |