When you’re done
1. | Turn Power Switch to OFF ( ) position. |
| |
2. | Unplug Power Cord from outlet. |
3.Remove and empty Dirty Water Tank.
a.Press detent Pedal and tip Handle back, laying it gently on floor.
b.Release Dirty Water Tank latches [1 each side] by pulling up from bottom of latch and then out.
c.Carefully lift Dirty Water Tank from Lower Body.
d.Carry Dirty Water Tank to a toilet or sink. To empty, pour out contents using opening at back of Tank.
e.Fill Dirty Water Tank with clean water through the Vent Cover and rinse thoroughly. Discard water.
4.Replace Dirty Water Tank on Lower Body and secure with latches. Replace Clean Water Tank.
5.Wrap Power Cord around Quick Release Cord Wrap™ on back of QUICKSTEAMER.™
6.Wipe all surfaces with a soft cloth. Store cleaner upright in a protected, dry area.
NOTE: You may have cleaning solution remaining in the Clean Water Tank. You may store your QuickSteamer this way for the next cleaning task, but never keep soiled solution in the Dirty Water Tank.
a.
b.
c.
WARNING:
Do not store unit where freezing may occur. Damage to internal components may result.
d.
e.
Vent
Cover