Eureka Microphone Preamplifier user manual 2 . 4 E Q U A L I Z E R, Controls & Connections

Models: Microphone Preamplifier

1 23
Download 23 pages 18.15 Kb
Page 12
Image 12
2 . 4 E Q U A L I Z E R

CONTROLS & CONNECTIONS

2 . 4 E Q U A L I Z E R

The EQ is divided into three sections or bands (Low, Mid and High) Each band has the following controls:

GAIN: Controls the amount of cut or boost of the corresponding frequency. Each gain control offers +/-10dB of attenuation.

FREQUENCY: Selects the center frequency of equalization. If the gain is set to 0, this control will have no effect.

Q (Bandwidth): Controls the width of the frequency being adjusted. Q is defined as the ratio of the center frequency divided by bandwidth. If the gain is set to 0, this control will have no effect. The Q on the Eureka ranges from 0.4 (wide) to 2.0 (narrow). In octaves the Q on the Eureka ranges from 3 octaves to 2/3 octaves.

BYPASS: When pushed in, the EQ is no longer equalizing the signal.

12

Page 12
Image 12
Eureka Microphone Preamplifier user manual 2 . 4 E Q U A L I Z E R, Controls & Connections