57
Instruction animation message display
Bobbin winding
The bobbin winder is winding the bobbin.
BH lever is not lowered
The buttonhole or darning stitch was selected and press on
the foot control while the buttonhole lever is raised.
- When operating correctly: 1 beep
- When the memory is full 30 units of pattern: 2-short beeps
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew : 8
seconds short beeps.
It means that the thread is twisted or jammed and the hand
wheel axle can't move. Please look thr oug h the " Trou ble
shooting guide" on page 61/62 to find the solution. After the
problem has been solved, the machine will continue to sew.
Warning beeping sound
Please Note:
If theproblem is still not solved, please contactyour local dealer.
Attention:
During the sewing, if the thread get jammed inside the hook
stopping the needle from moving and you continue pressing
the foot control, the security switch will stop the machine
completely. In order to restart the sewing machine, you will
have to turn the on/off switch to the OFF position and then
ON again.
WARNING FUNCTIONS04