Euro-Pro BPV325H Using Your Vacuum, Removing & Replacing Hepa Dust Bag, Manual Suction Control

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

5.To blow up inflatable items, select the appropriate size blower attachment that will fit into the air valve. (Fig. 19)

Fig. 19

6.Turn the unit on and hold the blower attachment and air valve while the vacuum exhaust is pumping air into the inflatable.

7.To detach the flexible hose turn clockwise and pull out from blower port.

Note: Firmly hold the flexible hose by the attachment when blowing dirt or dust off of objects.

Using Your Vacuum

Warning: To reduce the risk of electric shock, the power cord must be disconnected before removing the dust bag, shake-out bag, changing the filters or performing maintenance or trouble-shooting checks.

1.Insert the power plug into the wall outlet.

2.Connect hose and telescopic tube if desired.

3.Correctly place shoulder straps on each shoulder and secure the waist band with hook and loop strips. (Fig. 20)

Caution: If the waist band and both shoulder straps are not properly and securely in place the unit could fall off your back causing damage or injury.

Shoulder	Shoulder
Strap	Strap

Waist

Band

&

Tool

Storage

4.Turn the unit on by pressing the switch located near the base of the unit to turn the vacuum cleaner on. (Fig. 21)

Power

Switch

Fig. 21

Removing & Replacing HEPA Dust Bag

To remove the HEPA dust bag from the vacuum:

Important: DO NOT use the vacuum without all filters, shake-out bag, and with or without HEPA dust bag in place.

1.To remove the HEPA dust bag, press on the canister lid tabs on each side of the unit and lift canister lid. (Fig. 22)

Canister

Lid TabsCanister

Lid Tabs

Fig. 22

2.Pull the tab on the HEPA dust bag holder out slightly and flip upwards. (Fig. 22)

3.Holding the HEPA dust bag in your hand, slide it out from the slots in the bag holder. Hold carefully in order to avoid having dust fall out of HEPA dust bag. (Fig 23)

Tab

Dust
	Bag	Fig. 23
Holder

Attaching the Flexible Hose to the Vacuum

The flexible hose should be connected to the vacuum before strapping the unit to your back.

1.To connect the flexible hose into the hose inlet, insert the threaded end of the flexible hose into the hose inlet and turn counter-clockwise until it locks into place. (Fig. 6)

Fig. 6

2.Plug the power cord into the electrical outlet.

3.To remove the flexible hose, unplug the power cord and then turn the hose clockwise and pull the flexible hose out.

Attaching the Telescopic Tube to the Flexible Hose Handle

1.Holding the telescopic tube, insert the handle into the telescopic tube receptacle. Push the handle in.

(Fig. 7)

Fig. 7

2.Push forward on the plastic button and pull the inner tube outward to extend for a longer reach. (Fig. 8)

Fig. 8	Plastic
	Button

3.To remove the telescopic tube from the flexible hose, press on the telescopic tube release button and pull it out. (Fig. 9)

Telescopic Tube

Release

Fig. 9

Note: Always remove the power plug from the wall outlet before assembling or removing accessories.

Manual Suction Control

Your vacuum cleaner includes a manual variable suction control on the flexible hose handle . The suction power can be adjusted by moving the suction regulator to the desired position between Open and Closed. (Fig. 10) Open gives you less suction, closed maximum suction. For example, less suction is required on upholstery and draperies compared to thick carpets, which require maximum suction.

Fig. 10

Using the Floor to Carpet Brush

1.To attach the floor to carpet brush to the telescopic tube, insert the telescopic tube into carpet to floor brush. (Fig. 11)

Floor to

Carpet

Brush

Fig. 11

Fig. 20 8

5