GETTING TO KNOW YOUR HAND VACUUM
OPERATING INSTRUCTIONS
1. | Suction Hole | 6. | Dust Cup Filter |
2. | Dust Cup Release Button | 7. | Upholstery Brush |
3. On/Off Power Switch | 8. | Crevice Tool | |
4. | Handle | 9. | Flexible Hose |
5. | Dust Cup (Container) |
|
|
Technical Specifications
Warning: Always unplug from electrical outlet before opening the dust cup (container).
Note: Dust cup filter must be used when operating the hand vacuum.
Assembling the Hand Vacuum
1.To open the dust cup (container), push the dust cup release button and pull out the dust cup. Verify that the dust cup filter is inside, then attach the dust cup (container) to the hand vacuum.
2.To attach the crevice tool or upholstery brush to the Hand Vacuum, push desired accessory into the suction hole, as shown below.
3.To use the flexible hose, push the end of the hose into the suction hole, then attach the desired accessory to the other end of the flexible hose, as shown below.
How To Operate Your Hand Vacuum
1.Hold the hand vacuum firmly in your hand by the Handle.
2.Push the On/Off Power Button to “On” position.
3.Start vacuuming.
CAUTION: The Hand Vacuum is a very powerful unit. Make sure that you hold it firmly, otherwise it can slip out of your hand and cause injury.
Voltage: | 120V~ 60Hz. |
Power: | 3.2 Amps, 400 Watts |
| 2 |
3
