OPERATING INSTRUCTIONS cont.
REPLACEMENT FILTERS
Cleaning & Changing the Dust Cup Filter
Warning: Always unplug the unit from electrical outlet before opening the Dust Cup (container).
Important: Do NOT use the hand vacuum without the dust cup filter in place.
Warning: After each Use - Always remove and empty the Dust Cup Filter.
1.To open the Dust Cup (container), push the dust cup release button and detach the Dust Cup (container). (Fig. 1)
2.Remove the dust cup filter. (Fig. 2)
3.Empty the dust from the dust cup (container).
4.Rinse the dust cup filter in cold water and then wait 24 hours until it dries completely before replacing back into the dust cup (container).
5.When the dust cup filter is completely dry, replace the dust cup filter carefully back into the dust cup (container).
6.Attach the dust cup (container) to the Hand Vacuum.
CAUTION: The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.
Replacement dust cup filter SKU# XSB031
for Model EP031
Call: |
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or
visit our website: www.sharkvac.com
FOR TECHNICAL SUPPORT
In U.S.:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note
The Dust Cup Filter is washable. It should, however, be replaced every three
(3)months to ensure peak performance of your vacuum.
Important
Fig. 1
|
|
|
|
| Fig.2 | |
|
|
|
|
| ||
|
| TROUBLE SHOOTING GUIDE | ||||
|
|
|
|
|
| |
| PROBLEM |
| POSSIBLE REASON | POSSIBLE SOLUTION |
| |
|
|
|
|
|
|
|
| HAND VACUUM | 1. | Power cord not firmly plugged | 1. | Plug unit in firmly. |
|
|
| into outlet. | 2. | Check fuse or breaker. |
| |
| WILL NOT |
|
| |||
| 2. | No power in wall outlet. |
| Replace fuse/reset breaker. |
| |
| OPERATE |
|
| |||
| 3. | Needs servicing. | 3. | Call |
| |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| 1. | Allow unit to cool down, then |
|
|
|
|
|
| Restart. Empty dust cup – |
|
| HAND VACUUM | 1. | Dust cup is full. | 2. | (see page 4). |
|
| Turn unit off and unplug |
| ||||
| WILL NOT | 2. | Unit clogged. |
| from wall outlet. Remove |
|
| OR SUCTION | 3. | Dust Cup Filter needs |
| Dust Cup Filter and check |
|
| POWER IS WEAK |
| cleaning or replacing. |
| for object(s) in air duct and |
|
|
|
|
| 3. | remove. |
|
|
|
|
| Clean or replace Dust Cup |
| |
|
|
|
|
| Filter. (see page 4) |
|
|
|
|
|
|
|
|
| DUST ESCAPING | 1. | Dust cup is full. | 1. | Empty dust cup. |
|
| 2. | Dust Cup Filter is not | 2. | Review Dust Cup Filter |
| |
| FROM HAND | 3. | installed correctly. | 3. | instructions. (see page 4) |
|
| VACUUM | There is a puncture/hole in | Replace dust cup filter. (see |
| ||
|
|
| Dust Cup Filter. |
| page 4) |
|
|
|
|
|
|
|
|
| HAND VACUUM | 1. | Hose clogged. | 1. | Remove hose and/or |
|
| HOSE OR |
| bushes. Remove obstruction |
| ||
| BRUSHES WILL | 2. | Dust cup is full. | 2. | from hose. |
|
| NOT |
|
| Empty and clean dust cup. |
|
4
Make sure that Dust Cup Filter is completely dry before
5