Euro-Pro EP108H Power Unit, Speed Control & Locking, Unlocking Button, Slicing & Shredding Blades

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

The Bravetti Glass Food Processor is an indispensable kitchen tool for blending, chopping, mixing or pureeing when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in this book before using this

appliance.	Using the Chopping Blade:
Power Unit	1. Place the food processor bowl onto
		the slip guard pad.
The Power Unit operates on 120V.,
	2. Holding the chopping blade by
60Hz. electrical power. Never allow the		plastic hub, remove the protective
power unit to become wet when plugged		blade cover and insert it onto the
into an electrical outlet.		spindle. (Fig. 1)
Warning: The power unit should	3. Place the spindle with the blade
		onto the locating pin in the food
never be immersed in water.
		processor bowl. (Fig. 2)
Caution: Make sure that the
	4. Add ingredients that you wish to
power unit is unplugged from		process into the bowl.
power source before attaching	5. Place the processor inner lid onto
or removing any accessory.		the bowl making sure that it is
Speed Control & Locking/		placed correctly onto the bowl.
		(Fig. 3)
Unlocking Button	6. Place the power unit onto the bowl.
The speed control & locking/unlocking		Turn the locking/unlocking button to
		the left to lock the power unit in
button that is on the power unit will		place on the bowl. (Fig. 4)
automatically lock the power unit onto the
processor bowl when you turn it on.
The food processor has a variable speed		+		=
control dial and “Pulse”.
The speed can be adjusted while the
food processor is in use.		Fig. 1
Use of the “Pulse” button allows greater
control over the texture of the food being
processed. You can also use "Pulse"
when the unit is in the "Off" position.
Please note that the "Pulse" is only
intended to be used for short "bursts" of
processing.			Fig. 2
Operating the Food Processor
CAUTION - Blades are sharp. Use
extreme caution when handling
the blade, always hold it by the
plastic hub. Do not immerse the
power unit in water.
CAUTION: Make sure that the unit
is unplugged from the power
source.			Fig. 3
CAUTION: Never place food
processor bowls (glass or plastic)
in microwave or over direct heat.

Fig. 4

3

Operating:

1.Plug power cord into an electrical outlet.

2.To turn the unit on, turn the speed control more to the left until you get the speed that you desire. The speed can be adjusted while the unit is in use.

3.Now you are ready to use the food processor.

Note: Please note that the maximum amount of liquid to be processed at one time is 1 cup. Exceeding this quantity of liquid will cause overflow.

Attention: Do NOT operate this unit continuously for more than 10-15 seconds.

4.When you are finished using the food processor, turn the unit “Off”.

5.Unlock the power unit and remove from the food processor.

6.Remove the processor inner lid. Be sure that all chopping blade has stopped rotating before you remove the processor inner lid.

Warning: Do NOT operate this appliance when empty.

Using the Whipper:

1.Place the food processor bowl onto the slip guard pad.

2.Insert the whipper onto the spindle. (Fig. 5)

3.Place the spindle with the whipper onto the locating pin in the food processor bowl.

4.Add ingredients that you wish to process into the bowl.

5.Place the processor inner lid onto the bowl making sure that it is placed correctly onto the bowl.

6.Place the power unit onto the bowl. Turn the locking/unlocking button to the left to lock the power unit in place on the bowl.

+=

Fig. 5

Slicing & Shredding Blades

CAUTION: Make sure that the unit is unplugged from the power

source before inserting or removing attachments.

1.Select the blade that you wish to use. (Fig. 6)

2.To insert the blade of your choice into the blade holder, place the longer tab of the blade into the blade holder first. (Fig. 7)

3.Press the other end of the blade until it clicks into place. (Fig. 8)

4.Fit the processor bowl and spindle as detailed on the page 3. (Fig. 9)

5.Using the finger holes in the blade holder, fit it over the spindle and place spindle in processor bowl. (Fig. 10)

WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP.

6.Place the processor inner lid onto the bowl making sure that it is placed correctly onto the bowl. (Fig. 11)

7.Place the power unit onto the bowl. Turn the locking/unlocking button to the left to lock the power unit in place on the bowl. (Fig. 12)

Fig. 6

Fig. 7 Fig. 8 Fig. 9

Fig. 10 Fig. 11

Fig. 12

4