GETTING TO KNOW YOUR BIG SHARK
9
OPERATING INSTRUCTIONS
Warning: Always unplug from | 4. To use the flexible hose, push the | |
electrical outlet before opening the dust | smaller end of the hose into the | |
cup (container). | ||
suction hole, then attach the desired | ||
Note: HEPA dust cup filter must be | accessory to the other end of the | |
used when operating the hand vacuum. | flexible hose, as shown below. |
11 | Debris Screen | HEPA Filter |
|
|
8 12
7
10 13
Using The Unit As A Hand Vacuum
1.To open the dust cup (container), push button and pull out the dust cup. Verify that the HEPA dust cup filter inside, then attach the dust cup (container) to the hand vacuum.
2.To use the Hand Vacuum with the shoulder strap, attach it to the unit as shown below.
3.To attach the crevice tool or oval brush to the Hand Vacuum, push brush into the suction hole, as shown below.
How To Operate Your Hand Vacuum
1.Hold the hand vacuum firmly in your hand by the Handle.
2.Push the On/Off Power Switch to “On” position.
3.Start vacuuming.
CAUTION: The Hand Vacuum is a very powerful unit. Make sure that you hold it firmly, otherwise it can slip out of your hand and cause injury.
1.Push to Open Dust Cup (Container)
2.On/Off Power Switch
3.Suction Hole
4.Handle
5.Exhaust Cover Lock
6.Exhaust Cover
7.Shoulder Strap
8.Oval Brush
9.Holes for Attaching the Shoulder Strap
10.Dust Cup (Container)
11.Flexible Hose
12.Crevice Tool
13.Hepa Dust Cup Filter
Motor Thermostat
IMPORTANT: This motor is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit OFF.
Technical Specifications
Voltage: | 115V~ 60Hz. |
Power: | 7.8 Amps, 900 Watts |
2
Should this occur, unplug the vacuum cleaner from wall outlet or turn off switch. Allow the unit to cool. To restart,
3