Euro-Pro EP136R owner manual OPERATING INSTRUCTIONS cont, Precautionary Measures

OPERATING INSTRUCTIONS cont.

PRECAUTIONARY MEASURES

Emptying Dust Cup & Cleaning Dust Cup Filter

Warning: Always unplug from electrical outlet before opening the Dust Cup (container).

1.	To open the Dust Cup (container),
	push button and pull out the Dust Cup
	(container ).
2.	Pull out the Dust Cup Filter.
3.	Empty the dust from the Dust Cup
	Filter.

Changing & Cleaning the

Post Motor Filter

The post motor filter is a washable filter but should be replaced every three (3) months depending on usage.

•	Remove the filter cover from the rear
	of the unit.
•	Rinse the post motor filter in lukewarm
	water and dry the filter
	completely. Do not use a
	washing machine to rinse
	the filter. Do not use a hair
	dryer to dry it. Air dry only for
	24 hours. Never operate the
	vacuum without the post
	motor filter in place.
• When the filter is dry, replace
	into the unit and replace the filter
	cover over it.

Important: If the suction opening in the unit or the hose become blocked, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.

1. Do not operate the vacuum	5. When pulling out the power plug
cleaner to close too heaters,	from the wall outlet, pull the plug
or radiators.	not the power cord.

4.	Rinse the Dust Cup Filter in cold
	water, and then wait until it dries
	completely (24 hours) before
	replacing it into the Dust Cup
	(container).
5.	Place the Dust Cup Filter carefully into
	the Dust Cup (container).
6.	Attach the Dust Cup (container) to the
	Hand Vacuum.

Changing & Cleaning the

Pre- Motor Filter

The pre-motor filter is a washable filter but should be replaced every three (3) months depending on usage.

•Open the dust cup and remove the pre- motor filter.

•Rinse the pre-motor filter in lukewarm water and dry the filter completely. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry it. Air dry only for 24 hours. Never operate the vacuum without the pre-motor filter in place.

•When the filter is dry, replace into the unit and replace the filter cover over it.

•A severely solid or clogged filter should be thoroughly washed with fresh tepid water. A mild detergent can be used if required.

Pre-Motor

Filter

• A severely solid or clogged filter

should be thoroughly washed with

fresh tepid water. A mild detergent

can be used if required.

2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.

3.Do not vacuum any liquids.

4.Keep hair, loose clothing, fingers, feet and all parts of body away from openings.

6.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

7.Do not use without dust cup filter.

8.Before you start vacuuming, make sure to remove large or sharp objects that might damage the vacuum.

6

3