FILLING WITH WATER
•Ensure the unit is unplugged from the main supply before filling.
•Set the variable steam control (4) to position "MIN" (ie. No steam)
•slide the water filling inlet cover (7) down and use the measuring beaker (12) to pour the water in through the filling aperture (see picture).
•Do not overfill.
Note: Regular tap water can be used up to 12 grains water hardness but if your water exceeds this we suggest using 1/3 tap water and 2/3 distilled water. Never use 100% distilled water as this could cause water spitting and low steam performance.
8
