Maintenance & Care
For best cleaning results, the dust bag should be changed often. The use of powder carpet fresheners can decrease the effectiveness of the dust bag filtering system by clogging the bag and not allowing air to flow though properly. We recommend that hard objects, pins, broken glass, paper clips, etc. be picked up from the floor before vacuuming. Although, your vacuum will pick them up, they could do severe damage to the vacuum.
Use genuine
1.Changing the Dust Bag:
A)Unplug cord from wall outlet.
B)Pull
(11)on top of the cover.
C)Remove the old dust bag by holding the cardboard support and pull towards you from the bottom first and next from the top. Remove carefully to avoid dust/dirt spilling from dust bag.
D)Take a new dust bag and while holding the cardboard support push the bag over the opening of the dirt discharge tube until it is seated against the rear of the enclosure.
E)Make sure that the entire bag is inside the
F)Once the new dust bag is in place,
2. Changing the Filter: | Exhaust Filter |
A)This is best done while changing the dust bag.
B)Follow instructions for changing the dust bag. Once dust bag has been removed, peel off exhaust filter, located behind the dust bag on unit body.
C)The filter is held in place by Velcro strips and is easily removed and replaced for cleaning.
D)To clean filter rinse in warm, soapy water. Filter must by completely dry before
NOTE: DO NOT OPERATE VACUUM WITHOUT FILTER IN
PLACE.
E)Once filter has been replaced, follow instructions for installing dust bag and closing front hard shell cover.
3
