Euro-Pro EP700 Assembling Your Vacuum Cleaner, Operation, Release Power Cord, To Store Cord

Assembling Your Vacuum Cleaner

Warning: Do not plug in vacuum unit until it is fully assembled.

1.Carefully unpack all components, set aside packaging.

2.Place power nozzle section on a flat surface, loosen clamping collar. Make sure that the power nozzle elbow is in the vertical and locked position.

3.Take the middle body section and insert the tapered end

of the dirt tube into the top opening of the power nozzle
elbow. Clamp in place by turning the locking collar	Clamping Collar
clockwise. (Do not over-tighten.)

4.To assemble the handle, align the handle tube with the locking collar on the upper middle body section. Insert the tube until it is bottomed and then turn locking collar clockwise until secure. (Do not over-tighten.)

Power Cord

Unwrap power cord and push lower cord guide clip (7) onto dust tube just behind exhaust grill. Take extra cord guide clip (7) and push onto top handle section. Wrap power cord using cord storage hooks (6). Upper cord storage hook (6) swivels to make it easy to unwrap cord before using vacuum cleaner.

Operation

1.Release Power Cord:

The upper cord storage hook (6) has a quick release action. To release cord, rotate the hook downward and the entire power cord will drop off the hook for immediate use.

To Store Cord:

Return the cord hook (6) to the upright position before rewinding the cord. Unplug from wall outlet by grasping the plug and pulling, then rewind cord using upper and lower cord storage hooks.

2. Turn Vacuum On and Off:	On/Off Switch
To start the vacuum cleaner, push (step on) the switch (4)
on top right side of the power nozzle (3).
To stop the vacuum cleaner, push (step on) switch again.

2