Manuals / Brands / Laundry Appliance / Iron / Euro-Pro / Laundry Appliance / Iron

Euro-Pro EP7005 Attaching Iron to the Ironing Board

1 17

Attaching Iron to the Ironing Board

Your Steam Station is equipped with a clamp that can be used to attach the iron stand (8) to

your ironing board (or any other suitable surface). (Fig. 10)

• Rotate the clamp 90°, so that it points down.

• Place the iron stand (8) next to the edge of the table with the clamp on the bottom.

• Turn the wing nut clockwise and then tighten it to the ironing board or table.

• Reverse the process when finished ironing to remove the Steam Station from the ironing

board or table.

Fig. 10

SCREW

CLAMP

WING

NUT

IRONING BOARD

Contents

Main Steam Station IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY SPECIAL INSTRUCTIONS SAVE THESE INSTRUCTIONS Page Choosing the Ironing Temperature Temperature Setting Diagram Ironing Temperature Before First Use IMPORTANT How the Water is Pumped to the Iron Installing the Rubber Mat (10) onto the Iron Stand (8) IMPORTANT: Never place the hot iron on the plastic iron stand without the Filling the Water Tank (8) A Word on Water Filling the Water Tank How the Water is Pumped to the Iron Ironing Without Steam IMPORTANT: Never rest the hot iron on the plastic iron stand (8). Always attach the rubber mat (10) on top of the iron stand (8). Ironing With Steam IMPORTANT: Do not place the rubber mat (10) on a table or any other IMPORTANT: Do not open the steam control (2) or push the burst-of-steam Anti-Drip Function Continuous Steam Function IMPORTANT: Just before the water tank (8A) is completely empty, there Continuous Vertical Steaming Burst-Of-Steam Function Note: Steaming in a Vertical Position Water Spraying Note: Attaching Iron to the Ironing Board Cleaning Storage How to Replace the Anti-Calc Cassette Iron Troubleshooting ONE (1) YEAR LIMITED WARRANTY *Important EP7005 ----------------------------------------------------------------- OWNERSHIP REGISTRATION CARD