Manuals / Brands / Laundry Appliance / Iron / Euro-Pro / Laundry Appliance / Iron

Euro-Pro EP7005 Installing the Rubber Mat (10) onto the Iron Stand (8)

1 17

Installing the Rubber Mat (10) onto the Iron Stand (8)

Please note that during transportation, the rubber mat (10) may come off its place.

• The iron stand (8) has 5 holes on the circumference of its top.

• The rubber mat (10) has 5 pins in the corresponding locations.

• Place the rubber mat (10) on top of the iron stand (8) and push each individual pin into its hole. (Fig. 1)

rubber mat on top of the iron stand.

Fig. 1

Contents

Main Steam Station IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY SPECIAL INSTRUCTIONS SAVE THESE INSTRUCTIONS Page Choosing the Ironing Temperature Temperature Setting Diagram Ironing Temperature Before First Use IMPORTANT How the Water is Pumped to the Iron Installing the Rubber Mat (10) onto the Iron Stand (8) IMPORTANT: Never place the hot iron on the plastic iron stand without the Filling the Water Tank (8) A Word on Water Filling the Water Tank How the Water is Pumped to the Iron Ironing Without Steam IMPORTANT: Never rest the hot iron on the plastic iron stand (8). Always attach the rubber mat (10) on top of the iron stand (8). Ironing With Steam IMPORTANT: Do not place the rubber mat (10) on a table or any other IMPORTANT: Do not open the steam control (2) or push the burst-of-steam Anti-Drip Function Continuous Steam Function IMPORTANT: Just before the water tank (8A) is completely empty, there Continuous Vertical Steaming Burst-Of-Steam Function Note: Steaming in a Vertical Position Water Spraying Note: Attaching Iron to the Ironing Board Cleaning Storage How to Replace the Anti-Calc Cassette Iron Troubleshooting ONE (1) YEAR LIMITED WARRANTY *Important EP7005 ----------------------------------------------------------------- OWNERSHIP REGISTRATION CARD