OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Replacing the Filters

Warning: To reduce the risk of electric shock, the hose, power

nozzle power cord and the power cord must be disconnected before changing the bag or performing maintenance/ troubleshooting.

Changing & Cleaning the

Pre-Motor Filter

Your vacuum is equipped with a filtration system to reduce dust and pollen in your home as you clean. The pre-motor filter is located inside the vacuum cleaner body behind the dust bag. Check when changing the dust bag and replace when dirty.

This is a rinseable filter but should be replaced every six (6) months. Never operate the vacuum without ALL the filters in place

To remove, open the dust bag compartment cover and pull the pre- motor assembly out of the vacuum. Remove the filter from the filter assembly. Rinse in lukewarm water and let it air dry completely for 24 hours. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry it. Air dry only. When the pre-motor filter is completely dry, insert it in the filter assembly and replace it into the vacuum. (Fig. 16)

Pre-Motor

Filter

Fig. 16

Changing & Cleaning the HEPA- Type Post Motor Filter

The HEPA-Type post motor filter should be replaced every six (6) months depending on usage. Never operate the vacuum without ALL the filters in place.

•Push the Power On/Off button to the "Off" position and disconnect the power cord from the wall outlet.

•The HEPA-Type post motor filter is located just underneath the dust bag compartment cover. (Fig. 17)

•Hold the HEPA-Type post motor filter assembly by the tab and pull the assembly out.

•Replace with a new HEPA-Type filter.

Fig. 17

HEPA-Type Post Motor

Filter

Motor Thermostat

Important: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•

Push the On/Off button once.

•

Disconnect the plug from the

 

power source.

•

Check the source of overheating

 

problem. (i.e. clogged hose or

 

filter)

• If clogged hose or filter is found,

 

unclog the hose and replace the

 

filters.

•

Wait at least 45 minutes before

Assembling Your Vacuum Cleaner

Note: Always remove the power plug from the wall outlet before assembling or removing accessories.

Attaching the Flexible Hose into the Vacuum

•Connect the flexible hose into the flexible hose inlet. Push in until you hear a “click”, indicating it is in its locked position. (Fig 1)

•Connect the hose connecting power cord from the flexible hose to the power cord receptacle that is on the unit just underneath the handle. (Fig. 1)

•To remove the flexible hose first remove the power nozzle power cord from the receptacle for the power nozzle power cord, then depress locking button and remove hose.

Power cord receptacle

Fig. 1

Fitting the Telescopic Tube to the Curved Wand / Hose Extension

•Push the extension tube into the curved wand / hose extension, as shown in the illustration below. Make sure that the extension tube locks in place. (Fig. 2)

Fig. 2

Extending the Chrome Telescopic Tube

Fitting the Floor to Carpet Brush to the Telescopic Tube

•Push the telescopic tube into the floor brush as show in Fig. 4.

Telescopic

Tube

Floor to Carpet

Nozzle

Fig. 4

Using Power Nozzle

Connecting the power nozzle to the telescopic tube:

•Depress the button on the telescopic tube and insert it into the slot on the power nozzle elbow.

•Push the telescopic tube down until you hear a "click". (Fig. 5)

Telescopic

Tube

Power

Nozzle

Fig. 5

•Insert the power nozzle cord plug into the power socket on the flexible hose. (Fig. 6)

•To start power nozzle press the On/Off button that is located on the power nozzle.

attempting to reuse the vacuum.

• After unit has cooled down for

45 minutes, plug in the cleaner

and push the On/Off button. The

vacuum should start again.

• If the vacuum still does not start,

contact customer service at

1 (800) 798-7398.

•Push forward on the plastic button and pull the inner chrome tube outward. (Fig. 3)

Plastic Fig. 3 Button

Fig. 6

7

4

Page 4 Page 6
Page 5
Image 5
Euro-Pro EP733H Replacing the Filters, Changing & Cleaning Pre-Motor Filter, Motor Thermostat, Using Power Nozzle
Page 4 Page 6

EP733H specifications

The Euro-Pro EP733H is a versatile and efficient steam iron designed to make the task of ironing clothes simpler and more effective. With a sleek design and a focus on functionality, this appliance is ideal for both casual users and experienced homemakers looking to maintain a polished wardrobe.

One of the standout features of the EP733H is its powerful steam output, which allows for effortless removal of wrinkles from various fabrics. The steam burst function provides an additional boost of steam, penetrating deep into fabrics to tackle the toughest creases. This feature is particularly beneficial for thicker materials, such as linens or heavy cottons, ensuring that even the most stubborn wrinkles are smoothed out with ease.

The EP733H also boasts a stainless-steel soleplate that ensures smooth gliding across garments. This durable soleplate is designed to distribute heat evenly, minimizing the risk of scorching or damaging delicate fabrics. Additionally, the soleplate's non-stick surface enhances its performance, allowing for a seamless ironing experience.

Another key technology incorporated into the Euro-Pro EP733H is the automatic shut-off feature. This safety mechanism activates when the iron is left unattended for a certain period, reducing the risk of accidents and providing peace of mind for users. The anti-drip system further enhances the usability of this iron by preventing water leaks, which can cause unsightly stains on clothing.

The EP733H includes a generous water tank capacity, enabling longer ironing sessions without frequent refills. The water tank is also designed for easy filling, often incorporating a transparent window to monitor water levels conveniently. This practical design element ensures that users can maintain continuous steam production for efficient ironing.

Furthermore, the Euro-Pro EP733H features adjustable steam settings, allowing users to tailor the steam output based on the specific fabric being ironed. This level of customization ensures that each garment receives the appropriate treatment, protecting sensitive materials while still delivering effective wrinkle removal.

In conclusion, the Euro-Pro EP733H is an ideal solution for anyone seeking a powerful, efficient, and user-friendly steam iron. With its advanced features, including a stainless-steel soleplate, automatic shut-off, and adjustable steam settings, this appliance stands out as a reliable choice for keeping clothes looking their best.
Top Page Image Contents