Euro-Pro manual for Model EP825, Changing the Dust Bag, Never Reuse Paper Bags, Upright Vacuum

Models: EP825

1 2
Download 2 pages 43.04 Kb
Page 1
Image 1
Upright Vacuum

Upright Vacuum

Item # XSG825

for Model EP825

10 Paper Bags – 2 Belts – 1 Bulb

Warning: To reduce the risk of electric shock, the power cord must be disconnected before changing the bag or performing maintenance/trouble shooting checks.

Changing the Dust Bag:

A)Unplug power cord from wall outlet.

B)Remove the front panel of the unit.

C)Remove the old dust bag by holding the cardboard tab and pull towards you. Remove carefully to avoid dust/dirt spilling from dust bag.

D)Take a new dust bag and while holding the cardboard tab push the bag over the opening of the dirt discharge tube until it is seated against the rear of the enclosure.

E)Make sure that the entire bag is inside the housing, before replacing the front panel. Always check the pre-motor and post motor filters every time you change the dust bag.

F)Once the new dust bag is in place, replace the front panel by aligning the bottom locking tabs with the slots in the body, close cover slowly allowing the front panel to snap in place. The latch will self lock.

NEVER REUSE PAPER BAGS

For information or assistance, call 1-866-98SHARK (1-866-987-4275)

USA: EURO-PRO Operating LLC

Canada: EURO-PRO Operating LLC

21 Lawrence Paquette Industrial Drive

4400 Bois Franc

Champlain, NY 12919

St. Laurent, QC H4S 1A7

or visit our website: www.sharkvac.com

Upright Vacuum

Item # XSG825

for Model EP825

10 Paper Bags – 2 Belts – 1 Bulb

Warning: To reduce the risk of electric shock, the power cord must be disconnected before changing the bag or performing maintenance/trouble shooting checks.

Changing the Dust Bag:

A)Unplug power cord from wall outlet.

B)Remove the front panel of the unit.

C)Remove the old dust bag by holding the cardboard tab and pull towards you. Remove carefully to avoid dust/dirt spilling from dust bag.

D)Take a new dust bag and while holding the cardboard tab push the bag over the opening of the dirt discharge tube until it is seated against the rear of the enclosure.

E)Make sure that the entire bag is inside the housing, before replacing the front panel. Always check the pre-motor and post motor filters every time you change the dust bag.

F)Once the new dust bag is in place, replace the front panel by aligning the bottom locking tabs with the slots in the body, close cover slowly allowing the front panel to snap in place. The latch will self lock.

NEVER REUSE PAPER BAGS

For information or assistance, call 1-866-98SHARK (1-866-987-4275)

USA: EURO-PRO Operating LLC

Canada: EURO-PRO Operating LLC

21 Lawrence Paquette Industrial Drive

4400 Bois Franc

Champlain, NY 12919

St. Laurent, QC H4S 1A7

or visit our website: www.sharkvac.com

Rev.12/03

Rev.12/03

Printed in China

Printed in China

Page 1
Image 1
Euro-Pro manual for Model EP825, Changing the Dust Bag, Never Reuse Paper Bags, Upright Vacuum, Item # XSG825