Operating Instructions

OPERATING INSTRUCTIONS

Features

Double insulated freezer canister. Double insulated walls keep the freezer canister colder for longer periods and for better freezing results. The gel inside these double walls provides thorough and even freezing throughout use.

See through cover with feeder hole. The see through cover allows you to keep an eye on the freezing process. The convenient feeder hole allows you to add ingredients without having to stop the unit to do so.

Before First Use

Remove all packing materials and manuals form inside your new gel canister ice cream maker.

Wash each part of the unit which touches the ingredients, such as the Stirring Paddle, Lid, and the Ice Cream bucket. Parts should be washed with warm water and a mild dish washing detergent and wiped completely dry. Do NOT use abrasive cleaners to clean as these may

Using Your Ice Cream Maker

Your ice cream maker can make up to 1 1/2 quarts of ice cream. Due to an increase in volume when freezing the ingredients, you should not exceed 1 quart of liquid ingredients. If you are using your own recipes, adapt the volume of the mixture not to exceed this amount.

1.Place the freezer canister into the coldest part of your freezer the day before. See chart for approximate freezing time.

2.Make sure that the On/Off button is in the "Off" position.

3.To assemble the unit, insert the drive unit into the cover until it locks in place. The two tabs on the bottom of the drive unit will lock into the cover. (Fig. 1)

Making Ice Cream (cont.)

4.Remove the freezer canister from the freezer.

5.Place drive unit with the cover on the freezer canister. Make sure that all the locking tabs are aligned. Rotate the cover clockwise slightly so that the tabs lock in place. (Fig. 4)

Fig. 4

9.To add ingredients after the freezing process has started, slowly add them through the feeder hole.

10.To avoid overheating the motor, the direction of the rotation will change when the mixture becomes too thick. If the direction of the rotation continues to change, the mixture is completely prepared.

Turn the unit off.

11.Remove the cover with the paddle from the ice cream mixture. Use only rubber, plastic or wooden utensil to serve or remove from the freezer canister. Metal utensils may damage the freezer canister.

12.To further harden the ice cream, you may place the freezer canister in the freezer for a short period of time (no longer than thirty minutes). For longer freezing time. You should empty the ice cream in an airtight container.

damage your appliance. Power head may be wiped clean with a damp cloth. Do NOT clean appliance in dishwasher.

Freezing the Freezer Canister

The most important step in making frozen desserts, is making sure that the freezer canister is completely frozen. The Bravetti Gel Canister Ice Cream Maker features a double walled insulated freezer canister for perfect frozen desserts every time. To freeze your canister, wrap it in a large resealable freezer bag and place it upright in the coldest part of your freezer. Using a resealable freezer bag prevents ice crystals from forming on the freezer canister. The length of time to properly freeze the freezer canister depends on how cold your freezer temperature is. To make sure that your freezer canister is properly frozen, you should not hear any gel moving within the freezer canister when you shake it.

FREEZING GUIDE

FREEZER TEMP

APPROX. FREEZING TIME

-22° F / -30° C

8-9 Hours

 

 

-13° F / -25° C

12-13 Hours

 

 

0° F / -18° C

20-22 Hours

 

 

5° F / -15° C

24 Hours or more

Fig. 1

3.Insert the paddle extender into the paddle (Fig.2) and then insert the paddle into the drive unit. (Fig. 3)

Fig. 2

Fig. 3

6.Insert the plug into the power outlet and start the unit right away. This will prevent the paddle from freezing onto the freezer canister.

7.Pour the prepared ice cream mixture through the feeder hole into the freezer canister. (Fig. 5)

Fig. 5

Important: It is very important that the freezer canister be used immediately after being taken out of the freezer as it starts to thaw once it is removed from the freezer.

8.Leave the unit on for approximately 20-40 minutes or until the mixture reaches the desired consistency. Do not turn the unit "Off" during use as the mixture may freeze and prevent the paddle from turning.

Cleaning Your Ice Cream Maker

The freezer canister may be washed in warm water with a mild dishwashing detergent then dried thoroughly.

To separate the freezer canister from the upper and lower rings for washing, press on the release button and lift the upper ring first. Then remove the lower ring by sliding it off the freezer canister. To replace the upper and lower rings after the freezer canister is completely dry, slide on the lower ring first aligning the hole for the release button with the arrow on the freezer canister. Then insert the upper ring making sure that the two rings snap together.

Do NOT wash any part in a dishwasher.

Do NOT use sharp utensils, scouring pads or abrasive cleansers to clean the freezer canister.

The drive unit may be cleaned with a damp cloth. Never immerse the drive unit in water or any other liquid.

Never place the freezer canister in the freezer if it is still wet. Always make sure that the freezer canister is completely dry before placing in the freezer.

3

4

Page 4
Image 4
Euro-Pro KP160H owner manual Operating Instructions

KP160H specifications

The Euro-Pro KP160H is a versatile kitchen appliance designed to enhance your culinary experience and streamline meal preparation. As a standout model in the Euro-Pro lineup, it combines functionality with innovative technology, making it a valuable addition to any kitchen.

One of the main features of the Euro-Pro KP160H is its powerful motor, which provides efficient and consistent performance. With a wattage of 1600, this appliance has enough strength to handle various cooking tasks, from blending smoothies to mixing thick dough. Its variable speed settings allow users to adjust the blending speed according to their specific needs, giving them the control to achieve the desired consistency for their recipes.

The KP160H is equipped with a durable stainless steel blade system that ensures optimal cutting and blending efficiency. This technology not only enhances the appliance's performance but also guarantees longevity and easy maintenance. The blades are designed to crush ice and blend tough ingredients, making it ideal for creating a range of dishes, including soups, sauces, and desserts.

Another key characteristic of the Euro-Pro KP160H is its user-friendly design. The appliance features an intuitive control panel with simple buttons for easy operation. This makes it accessible for users of all skill levels, from novice cooks to experienced chefs. Additionally, the KP160H boasts a large capacity blending jar, allowing for the preparation of larger servings or multiple portions at once, which is perfect for families or entertaining guests.

Safety is also a priority in the design of the Euro-Pro KP160H. The appliance is equipped with a safety lock mechanism that prevents operation unless the lid is securely in place. This feature minimizes the risk of spills and accidents, making it a safer option for use in busy kitchens.

Furthermore, the Euro-Pro KP160H is designed with a sleek, modern aesthetic that can seamlessly fit into any kitchen decor. Its compact size also ensures that it does not take up excessive counter space, making it suitable for smaller kitchens.

In summary, the Euro-Pro KP160H is an outstanding kitchen appliance that combines powerful performance, advanced technology, and user-friendly features. Whether you are looking to whip up a quick smoothie, prepare a soup, or create a dessert, this versatile blender is equipped to handle it all, making it an essential tool for any home chef.