CLEANING & MAINTENANCE

CAUTION: Make sure that the unit is unplugged from power source and control button is on “OFF” before inserting or removing any attachments and before cleaning.

IMPORTANT SAFEGUARDS

Read Instruction Manual Before Use

When using electrical appliances, basic safety precautions should always be followed, including the following:

•Never immerse the unit, cord or plug in water or any other liquid.

•Clean the main unit with a damp cloth only.

•Only the stainless steel blades can be washed in the dishwasher.

•All other parts can be cleaned in warm sudsy water using regular dishwashing liquid.

•If food has spilled over on to the main unit, use the pointy end of the spatula to clean the cracks and crevices of the base under the food processor bowl. (Fig. 14)

Fig. 14

Hints & Tips:

• The double chopping blade can be

used for chopping meat, fish,

vegetables, cheese, etc. setting

the speed to maximum.

• For finer chopping, increase the

length of time you process.

• For coarser chopping, use the pulse

button for a few seconds and monitor

food texture.

• Pre-cut larger pieces to make them fit

into the feed tube. When chopping

Re-settable Thermal Safety Device

Your Food Processor has been designed with a unique safety system which prevents damage to the unit’s motor and drive system, should you inadvertently overload your appliance. The safety system will automatically cut the electric power to the appliance when the device senses an overload or excessive temperature in the motor or drive system. Should this occur during use and the appliance stops functioning, follow the re-setting procedure below:

1.Turn the “ON/OFF” speed control to the “OFF” position

2.Unplug the unit from the wall receptacle.

3.Remove and empty the processor bowl. Ensure that no food is jamming the cutting blades or attachments.

4.Allow the appliance to cool down for a minimum of 30 minutes.

5.Re-install the processor bowl and re-plug appliance in the wall outlet.

6.Proceed to use the appliance as before. Should the appliance still fail to operate, turn the “ON/OFF” speed control to the “OFF” position and unplug from the wall outlet. Allow the appliance to cool down for an additional 1 to 2 hours. After this time has passed, repeat the restart procedure, steps 5 and 6 above.

1.Read all instructions before using the appliance. It is suggested that you keep these instructions in a safe place for future reference.

2.Your voltage must correspond to the voltage printed on the bottom of the appliance.

3.To protect against electrical shock, do not immerse the motor housing (base), cord, or plug in water or other liquid.

4.Close supervision is necessary when the appliance is used by or near children.

5.Unplug appliance from outlet when not in use, before putting on or taking off parts and before cleaning.

6.Avoid touching moving parts at all times.

7.Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair, electrical or mechanical adjustment.

8.The use of attachments including canning jars not recommended by the manufacturer may cause fire, electric shock or injury to persons.

9.Do not use outdoors.

10.Do not let cord hang over edge of table or counter or touch hot surfaces.

11.Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running.

12.Blades are sharp. Handle carefully. When handling the chopper blade always hold it by the plastic hub.

13.To reduce the risk of injury, never place cutting blades or discs on the base without first putting bowl properly in place.

14.Be certain cover is securely locked in place before operating appliance.

15.Never feed food by hand. Always use food pusher.

16.Do not attempt to by-pass the cover interlock mechanism.

17.Always operate food processor with the cover in place.

hard foods (e.g. meat, cheese) cut

into 1 “/2.4 cm cubes.

• For shredding, place food horizontally

into the feed tube, for slicing place the

food vertically.

IMPORTANT NOTICE

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

8

1

REV. 06/03C

 

Page 2 Page 4
Page 3
Image 3
Euro-Pro KP80S Important Safeguards, Cleaning & Maintenance, Hints & Tips, Re-settable Thermal Safety Device, REV /03C
Page 2 Page 4

KP80S specifications

The Euro-Pro KP80S is a prominent kitchen appliance designed to bring efficiency and innovation to everyday cooking tasks. This compact and versatile food processor is engineered to handle a variety of meal preparations, making it an essential addition to any modern kitchen.

One of the standout features of the KP80S is its robust motor, which provides ample power for chopping, blending, and slicing through various ingredients with ease. This appliance is not only powerful but also user-friendly, ensuring that home cooks of all skill levels can create gourmet-quality meals without hassle. Its intuitive controls allow for straightforward operation, offering speed settings to accommodate different recipes and textures.

The Euro-Pro KP80S boasts a variety of attachments and accessories, including a stainless-steel chopping blade, a slicing disc, and a shredding disc. These attachments enhance its versatility, allowing users to prepare everything from shredded vegetables for salads to finely chopped herbs for garnishes. The processor’s bowl is spacious enough to handle large quantities, making it ideal for meal prepping.

Another key technology integrated into the KP80S is its safety features. The food processor is equipped with a locking mechanism that ensures the lid is secured during operation, minimizing the risk of accidents. Additionally, it has non-slip feet that provide stability, ensuring the appliance stays in place even during rigorous tasks.

In terms of design, the Euro-Pro KP80S features a sleek and modern aesthetic, available in various color options to suit different kitchen styles. The appliance is constructed from high-quality materials, ensuring durability and longevity. Its compact size makes it easy to store, while still offering ample capacity for food preparation.

Cleaning the KP80S is a breeze, as most removable parts are dishwasher-safe, promoting convenience in maintenance. This ease of cleaning encourages users to incorporate it into their daily routines.

Overall, the Euro-Pro KP80S is a powerful, versatile, and user-friendly food processor that simplifies the cooking process. With its innovative features and technologies, it caters to a variety of culinary tasks, making it a valuable tool for both novice cooks and seasoned chefs alike. Whether it’s for quick meal prep or elaborate culinary creations, the KP80S stands out as a reliable kitchen companion.
Top Page Image Contents