How to Use
Pull out to remove tool caddy
Align arrows to attach tool caddy
Fig. 1 | Fig. 2 |
Fig. 3
Power
Button
Fig. 4 | Fig. 5 |
|
Fig. 6
ASSEMBLING THE
1Insert the end of the flexible hose into the connector on the front of the
2Insert the removable tool caddy onto the back of the Portable Vac. (fig. 2) To remove the tool caddy, hold the vacuum by the handle, pull out slightly from the right side and then remove it from the Portable Vac. (fig. 3)
3Insert the crevice tool, dusting brush, upholstery brush or power brush into the openings on the tool caddy. (fig. 3)
4Attach the shoulder strap onto the hooks on the handle of the Portable Vac. (fig. 4)
5Empty Dust Cup after cleaning and periodically during cleaning when it appears full. (See “Maintenance” section for instructions.)
8 | TOLL FREE: |
NP320series_40_IB_ENG_120409_2.indd 8
FOR ADDED COMFORT OR FOR AN EXTENDED REACH
6Attach the floor kit handle to the flexible hose. Push it in until it is secure. (fig. 6)
7Insert the telescopic tube into the end of the floor kit handle. Push it in until it is secure. (fig. 6)
NOTE: All accessories may be used with the flexible hose, the floor kit handle or the telescopic tube.
8Attach the desired accessory to the end of the flexible hose, floor kit handle or telescopic tube by pushing it in until it is tightly secured. (fig. 6)
9While holding the Portable Vac by the handle, press down on the power button to turn the Portable Vac on and begin vacuuming. Press down again to turn the vacuum off. (fig. 5)
