OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The Ninja Master Prep is an indispensable kitchen tool that is perfect for blending, chopping, mixing or pureeing when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.
Using the Master Prep Bowl CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always hold them by the shaft.
NOTE: Do not add more than 2 cups dry or 1 cup liquid ingredients as this will strain the motor and may cause overflow.
5. Place the power head on the master |
400 Watt Power Head
The 400 watt power head operates on 120V., 60 Hz. electrical power. Never allow the power head to become wet when plugged into an electrical outlet. WARNING: The power head should never be immersed in water or any other liquid.
CAUTION: Make sure that the power head is unplugged from the electrical outlet and that the blades have stopped turning before attaching or removing any accessory.
Using the Master Prep Pitcher CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always hold them by the hub.
IMPORTANT: Never run the appliance empty.
1.Place the master prep pitcher on a clean, dry, level surface.
2.Holding the lower blade by the shaft, place it onto the spindle pin inside the master prep pitcher and then carefully slide the upper blade onto the shaft of the lower blade. Make sure that the upper blade slides down into the slots of the lower blade shaft. (Fig. 1, Fig. 2) Make sure that when you are inserting the upper blade, the blades are on the bottom.
| shaft |
|
|
|
| |
| spindle |
|
|
|
| |
|
|
|
|
|
|
|
| Fig. 1 | Fig. 2 | ||||
WARNING: Do not try |
|
|
|
| ||
|
|
|
| |||
to place the blades |
|
|
|
| ||
onto the power head |
|
|
|
| ||
and then into the |
|
|
|
| ||
Master prep pitcher. |
|
|
|
| ||
(Fig. 3) |
|
| Fig. 3 | |||
|
|
|
|
| 3 | |
3.Add the ingredients to be processed into the master prep pitcher.
4.Place the pitcher splash guard onto the top of the master prep pitcher. (Fig. 4)
5.Place the power head on top of the pitcher splash guard making sure that it is securely in place. (Fig. 5) Do not attempt to operate the appliance without the safety splash guard in place.
Fig. 4 | Fig. 5 |
6.To start the appliance, press on the On/Off Pulse button located on the top of the power head. To stop the appliance, remove your fingers from the On/Off Pulse button. In order to obtain a better quality of chopping, operate the appliance by using the “pulse” method. If the ingredients stick to the side of the master prep pitcher, stop the appliance, remove the power head and the splash guard. Use a spatula to dislodge the pieces and then replace the splash guard and the power head. Continue processing.
NOTE: Do not operate the appliance continuously for more than 20 seconds at a time or when empty.
7.Hold the master prep pitcher firmly while depressing the
8.Make sure that the blades have stopped completely before removing the splash guard.
9.Remove the blade assembly by its shaft before you empty the contents of the master prep pitcher.
10.Never add ingredients into the master prep pitcher before placing the blade assembly in first.
IMPORTANT: Never run the appliance empty.
1.Place the master prep bowl on a clean, dry, level surface.
2.Holding the lower blade by the shaft, place it over the spindle pin inside the master prep bowl. (Fig. 6)
shaft
spindle
Fig. 6
3.Carefully insert the upper blade over the lower blade rotating it until it locks onto the lower blade.
(Fig. 7, Fig. 8)
IMPORTANT: Always assemble the blades inside the container.
Fig. 7
Upper
Blade
Lower
Blade
| Blades |
Fig. 8 | Assembled |
|
CAUTION: Be careful not to hold by the blades as the blades are very sharp.
4.Place the food that you want to process into the master prep bowl and place the splash guard on the bowl.
4
prep bowl. (Fig. 9) |
Fig. 9
6.Plug the power cord into the electrical outlet.
7.To start the appliance, press on the On/Off Pulse button located on the top of the power head. To stop the appliance, remove your fingers from the On/Off Pulse button. In order to obtain a better quality of chopping, operate the appliance by using the “pulse” method. If the ingredients stick to the side of the master prep bowl, stop the appliance, remove the power head and the splash guard. Use a spatula to dislodge the pieces and then replace the splash guard and the power head. Continue processing.
NOTE: Do not operate the appliance continuously for more than 20 seconds at a time or when empty. Be careful not to over process. For coarsely chopped foods, use repeated short pulsing action until the desired consistency is reached.
8.Hold the master prep bowl firmly while depressing the
9.Make sure that the blades have stopped completely before removing the splash guard.
