Euro-Pro S3306HG, S3306HC, S3306HB Operating Instructions, Window Squeegee, Extended Concentrator

Fig. 6

Fig. 7

Fig. 8

Fig. 5

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Using the Trigger Lock

The steam cleaner has a steam trigger lock that automatically engages when you depress the steam trigger. (Fig. 2)

To unlock the steam trigger, just press it in the direction of the hose.

Steam

Trigger Lock

Fig. 2

Using Your Steam Cleaner with Steam Pocket

Step 1. Connect the steam pocket accessory to the steam handle with two extension tubes. To attach the extension tubes one onto the other or onto the hand grip, press the locking button ensuring that it fits into the hole (Fig. 3., Fig. 4) and press the two sections together. To disconnect, repeat the operation by pressing the locking button and pulling the two sections apart.

Locking Button

Hand Grip Fig. 3

Fig. 4

6

Note: Fit the steam pocket frame with the angle adapter onto the extension tube. Step 2. If the angle adapter is not

attached to the steam pocket frame, attach as follows: Hold the steam pocket frame in one hand and the

angle adapter in the other. Insert the angle adapter steam into the opening of the steam pocket

frame as shown in Fig. 5. Note that the flat on the nozzle must face toward the side of the frame with the brass pin. Once inserted, rotate it 90°.

Step 3. Insert the electrical power cord into the outlet. Heating time is approximately 4-6 minutes with cold water. Filling the steam generator with hot water will shorten the heat up time.

Attaching the Steam Pocket Towel to the Frame

Warning: Always insure the unit is

“UNPLUGGED” from the wall receptacle prior to attaching or removing accessories.

1.Slide the steam pocket towel over the steam pocket frame. (Fig. 6)

2.Bring the towel all

the way to the top of the steam pocket frame. (Fig. 7)

3. Bring the hook and latch strips that are on the back side of the steam pocket towel over the steam pocket frame and attach to

the inside of the front side of the steam pocket towel. (Fig. 8)

Note: If replacing the steam pocket towel, make sure that the steam pocket frame has been allowed to cool before removing or attaching a new steam pocket towel.

Care & Maintenance of the Steam Pocket Towel

Due to the unique cleaning ability of this cloth, proper care of your micro-fiber towel is required to ensure long life and continued cleaning ability.

•The first thing you should do when you get a new micro-fiber towel is to wash and dry it. During the manufacturing process the fabric has a tendency to become flat as it picks up contaminants from the air and machinery. There will also be a number of loose threads that, while they cause no harm, can be annoying the first time you use the towel.

•To clean the towel, simply wash it in your washing machine using the warm water setting.

•Always wash your towels separately from other fabrics. They have a tendency to pick up lint and other particles from other fabrics and the next time you use your towel, this lint will transfer to the surface being cleaned.

•ONLY USE LIQUID DETERGENTS, never use dry detergents as many times the granules do not fully dissolve and become trapped in the towel. This can scratch the surface that you are cleaning.

•NEVER USE BLEACH OR FABRIC SOFTENERS! Bleach will damage the micro-fiber fabric and fabric softeners deposit a coating on the micro-fiber fabric what will not allow the cloth to clean efficiently.

•Air dry the towel. Do not put in a clothes dryer as high heat will cause the towel to shrink and the micro-fibers to break down.

•If you wash your towel on a regular basis and don’t let them get too dirty, they will last much longer. As with any fabric, dirt particles, grease and other contaminants can cause the fibers to break down, therefore regular cleaning will help preserve your micro-fiber towels.

•As you use the micro-fiber towel, you will notice that sometimes a thread will loosen or pull out. This is normal and you should NEVER PULL AT THE LOOSE THREAD! Pulling the thread can cause the weave to come undone. Instead, simply trim the thread with a pair of sharp scissors.

7

Caution: Be aware of hand placement and take care not to actuate the steam discharge switch while installing or removing accessories.

Attaching the Accessories to the Flexible Steam Hose

Allow the unit to cool for 5 minutes before changing accessories.

Window Squeegee

This attachment is very useful for cleaning large windows, plastic material, ceramic, tiled or marble surfaces.

Important: When cleaning windows, always avoid any sudden changes in temperature to prevent glass breakage or cracks.

To use: Connect the window squeegee to the hand

grip or use with extension tube for hard to reach surfaces.

Apply steam abundantly, then remove excess water and dirt with the glass wiping edge.

Extended Concentrator

Use the extended concentrator to clean under toilet rims

and hard to reach places. To use: Attach the extended concentrator to the handgrip or to the extension tubes.

Nylon Bristle Brush (x2)

It is best for cleaning grout in-between the tiles, ceramic and marble.

To use: Screw on the nylon bristle brush on to the end of the extended concentrator, which

then may be used directly

on the hand grip or with extension tubes.