Attachments
Brush for hard floors (#9).
100% white terry cloth towel can be fitted on this brush as to absorb the dirt and protect delicate surfaces. It can also be used on vertical washable surfaces following the same procedure as for the floor.
Important: Please note that bristles may break through thin towels. We recommend that two (2) towels, laid one on top of the other be used. This will ensure that the brush bristles do not break through and that the towels will be sufficiently absorbent and retain as much dirt as possible.
Very Important: When installing the towels to the floor brush, ensure that the towels do not cover the front and the back of the brush. (See fig. E)
Cloth Holder
Brush Wrapped With Terry Cloth
How to fit the Towel Over the Rectangular Brush (#9)
Important: Please note that bristles may break through thin towels. If you don’t have thick enough towels, please use 2 towels.
Fig. A
1.Prepare white terry cloth towel: size 8” x 17”
2.Place the brush on top of the towel.
Fig. C
4.Fold the other side of the towel as shown in Fig. C.
Fig. B
3. Fold the towel as shown in Fig. B
Fig. D
5.Place the corner under the cloth holder as shown in Fig. D.
8