OPERATING INSTRUCTIONS
WARNING: Always insure the unit is “UNPLUGGED” from the wall receptacle prior to attaching or removing accessories.
OPERATING INSTRUCTIONS cont.
Using Your Steam Cleaner with Triangular Brush
To attach the triangular brush to the angle adapter, hold angle adapter in your right hand and the brush in your left. Insert the angle adapter into the triangular brush and turn 180° to lock in place. See illustrations below.
Step 1: The triangle brush w/ angle adaptor connects either directly to the handgrip or may be used with the extension tubes. To connect the extension tubes to the hand grip attach the extension tubes one onto the other and then onto the hand grip. (See illustrations.) To disconnect, reverse the operation by pressing the locking button and pulling the two sections apart.
Locking
Button
Extension Tubes
Locking
Button
Hand
Grip
Attaching a Towel to the
Triangular Brush
100% white terry cloth towel can be fitted on this brush, so as to absorb the dirt and protect delicate surfaces.
Important: Please note that bristles may break through thin towels. We recommend that two (2) towels, laid one on top of the other be used. This will ensure that the brush bristles do not break through and that the towels will be sufficiently absorbent and retain as much dirt as possible.
Very Important: When installing the towels to the triangular brush, ensure that the towels do not cover the front and the back of the brush. (See fig. D)
Fig. A
1.Prepare white terry cloth towel: size 8” x 17” as shown in Fig. A.
2.Place the brush on top of the towel.
Fig. B
3. Fold the towel as shown in Fig. B
Fig. C
4.Place the corner under the cloth holder. (Fig. C)
Fig. D
5.Fold the other side of the towel in the same way and place the corner under the cloth holder. (Fig. D).
2
3
