REVERSING THE DOOR HINGES
The door on your Eurotech dryer is delivered to open from the right, but you can reverse the hinges so that it opens from the left. To do this, follow the steps below:
1.Unplug the dryer from the electrical outlet.
2.Supporting the door, remove the bottom left hinge then slide door down and off.
3.Remove the plastic plugs from the right side (A), top and bottom, by pressing the bottom edge of the plug with a screwdriver. Be careful not to scratch the surface of the machine.
4.Screw the hinge into the top
5.Use the plugs you removed from the
6.Remove the hinges on the right and place them on the left.
7.Remove the plug for the door catch (C).
8.Remove the door catch by pressing a screwdriver against the bottom of the plastic piece (Fig 1).
9.Place the door catch into the left receptacle (C), making sure the electrical connection is positioned properly.
10.Cover the right receptacle (C) with the plug you removed from the left side.
11.Remove the top left hinge and fit it into position on the right side.
12.Reposition the door and fit the bottom hinge into position.
13.Replace the hinge drill hole plugs on the opposite side.
ENGLISH
7
