Lenovo TD230 manual Removing and reinstalling the front bezel, Removing the server cover

5. Pivot the server cover outward to completely remove it.

Figure 12. Removing the server cover

To reinstall the server cover, see “Installing the server cover” on page 122.

Removing and reinstalling the front bezel

Attention:

Do not open your server or attempt any repair before reading and understanding the Safety Information and the Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and “Guidelines” on page 39. To obtain a copy of the publications, go to:

http://www.lenovo.com/support

This section provides instructions on how to remove and reinstall the front bezel.

To remove and reinstall the front bezel, do the following:

1.Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.

2.Remove the server cover. See “Removing the server cover” on page 43.

Chapter 5. Replacing FRUs 45