9.Hold the new microprocessor by the edges and align the notches 1 on it with the tabs microprocessor socket. Then, install the microprocessor into the socket.
2
in the
Figure 77. Installing the microprocessor
Replacing the system board battery
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and “Guidelines” on page 39. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the system board battery.
Your server has a special type of memory that maintains the date, time, and configuration information for
The system board battery normally requires no charging or maintenance throughout its life; however, no battery lasts forever. If the system board battery fails, the date, time, and configuration information, including passwords, are lost. An error message is displayed when you turn on the server.
Be sure to consider the following information when you replace the battery in the server:
•You must replace the battery with a lithium battery of the same type from the same manufacturer.
•To avoid possible danger, be sure to read and understand the following safety statement.
•After you replace the system board battery, you must reset passwords, system date and time, and reconfigure the server.
Statement 2
CAUTION:
When replacing the lithium battery, use only Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of. Do not:
• Throw or immerse into water
