Lenovo TD230 manual LEDs for the Ethernet connectors, Locating server components

Table 3. Hot-swap hard disk drive status LEDs

	Hot-swap hard disk drive status LED	State	Description
	Hot-swap hard disk drive present LED	On	The hot-swap hard disk drive is present.
1
		Off	The hot-swap hard disk drive is not present.
	Hot-swap hard disk drive activity LED	On	The hot-swap hard disk drive is active.
2
		Off	The hot-swap hard disk drive is not active.

LEDs for the Ethernet connectors

The Ethernet 1 and Ethernet 2 connectors have two status LEDs that indicate the LAN connection and activity of the connection.

Table 4. Ethernet LEDs

	LED	State	Color	Description
RJ-45	Linkage and Activity (left)	On	Green	10/100/1000 Mb linked
		Blinking	Green	10/100/1000 Mb activity
		Off	Off	No LAN connection.
RJ-45	Linkage and Activity (right)	On	Amber	1000 Mb linked and active
		On	Green	100 Mb linked and active
		Off	Off	10 Mb mode or no LAN connection.

Locating server components

Figure 6 “Server component locations (side view without the server cover)” on page 33 shows the locations of the major components in your server. To remove the server cover and gain access to the inside of the server, see “Removing the server cover” on page 43.

32ThinkServer TD230 Hardware Maintenance Manual