Table 25. Submenus under the PCI Configuration

Item

Option

 

 

Maximize Memory below 4 GB

[Disabled] / Enabled

 

 

Memory Mapped I/O above 4 GB

[Disabled] / Enabled

 

 

Onboard Video

[Enabled] / Disabled

 

 

Dual Monitor Video

[Disabled] / Enabled (If enable this option, the system can

 

support the add-in graphics card.)

 

 

Onboard NIC1 ROM

[Enabled] / Disabled

 

 

Onboard NIC2 ROM

[Enabled] / Disabled

 

 

Onboard iSCSI ROM

[Disabled] / Enabled

 

 

Note: The settings in [ ] are the default settings in the Setup Utility program.

Table 26. Submenus under the System Acoustic and Performance Configuration

Item

Option

Description

 

 

 

Set Throttling Mode

[Auto] / [OLTT] / [CLTT]

Set the throttling mode.

 

 

 

Altitude

300m or less / [301m-900m] /

Set the altitude.

 

901m-1500m / Higher than 1500m

 

 

 

 

Set Fan Profile

[Performance] / Acoustic

Select the priority for the system fan

 

 

control method.

 

 

 

Note: The settings in [ ] are the default settings in the Setup Utility program.

 

 

 

Table 27. Items under the Security menu

 

 

 

 

Item

Option

Description

 

 

 

Set Administrator Password

 

Set or change the administrator

 

 

password. The password can be

 

 

any combination of up to 7 (1 to 7)

 

 

alphabetic and numeric characters.

 

 

 

Set User Password

 

Set or change the user password. The

 

 

password can be any combination

 

 

of up to 7 (1 to 7) alphabetic and

 

 

numeric characters.

 

 

 

Front Panel Lockout

[Disabled] / Enabled

If this option is set to Enabled, the

 

 

power button and reset button on the

 

 

front panel will be locked.

 

 

 

Note: The settings in [ ] are the default settings in the Setup Utility program.

 

 

 

Table 28. Items under the Server Management menu

 

 

 

 

Item

Option

Description

 

 

 

Assert NMI on SERR

[Enabled] / Disabled

 

 

 

 

Assert NMI on PERR

[Enabled] / Disabled

 

 

 

 

Resume on AC Power Loss

[Stays Off] / Last state / Reset

If the power is interrupted when the

 

 

server is on, after the power resumes,

 

 

the server will restart automatically,

 

 

or keep the off state, or resume to the

 

 

last state.

 

 

 

Clear System Event Log

[Disabled] / Enabled

 

 

 

 

148ThinkServer TD230 Hardware Maintenance Manual

Page 154
Image 154
Lenovo TD230 manual Submenus under the PCI Configuration