NETGEAR L3 Config router route delete, Config router route preference, Show router vrrp info

7000 Series L3 Managed Switch Reference Manual for Software v2.0

config router route delete

This command causes a static route to be deleted. The <networkaddr> and <nexthopip> are valid IP address. The <subnetmask> is a 4-digit dotted-decimal number representing a valid Subnet Mask.

Format	config router route delete <networkaddr>
	<subnetmask> <nexthopip>

config router route preference

This command sets the route preference value of local and static routes in the router. Lower route preference values are preferred when determining the best route.

Default	Local -- 0; Static -- 60
Format	config router route preference <local/
	static> <0-255>

config router route default create

This command configures the default route. The value for <nexthopip> is a valid IP address of the next hop router.

Format	config router route default create
	<nexthopip>

config router route default delete

This command causes the static default route to be deleted.

Format config router route default delete

show router vrrp info

This command displays whether VRRP functionality is enabled or disabled on the 7000 Series L3 Managed Switch. It also displays some global parameters which are required for monitoring This command takes no options.

Format	show router vrrp info
VRRP Admin Mode	Displays the admin mode for VRRP functionality on the switch.
Routing Commands	8-29