7000 Series L3 Managed Switch Reference Manual for Software v2.0

Mark IP DSCP

Denotes the mark/re-mark value used as the DSCP for traffic

 

matching this class. This is not displayed if the config diffserv

 

policy mark ipdscp command was not specified, or if policing is

 

in use for the class under this policy.

Mark IP Precedence

Denotes the mark/re-mark value used as the IP Precedence for

 

traffic matching this class. This is not displayed if the config diff-

 

serv policy mark ipprecedence command was not specified, or if

 

either mark DSCP or policing is in use for the class under this

 

policy.

Policing Style

This field denotes the style of policing, if any, used (simple, sin-

 

gle rate, or two rate).

Committed Rate (Kbps)

This field displays the committed rate, used in simple policing,

 

single-rate policing, and two-rate policing.

Committed Burst Size (KB)

This field displays the committed burst size, used in simple polic-

 

ing, single-rate policing, and two-rate policing.

Excess Burst Size (KB)

This field displays the excess burst size, used in single-rate polic-

 

ing.

Peak Rate (Kbps)

This field displays the peak rate, used in two-rate policing.

Peak Burst Size (KB)

This field displays the peak burst size, used in two-rate policing.

Conform Action

The current setting for the action taken on a packet considered to

 

conform to the policing parameters. This is not displayed if polic-

 

ing is not in use for the class under this policy.

Conform DSCP Value

This field shows the DSCP mark value if the conform action is

 

markdscp.

Conform IP

This field shows the IP Precedence mark value if the conform

Precedence Value

 

action is markprec.

Exceed Action

The current setting for the action taken on a packet considered to

 

exceed to the policing parameters. This is not displayed if polic-

 

ing not in use for the class under this policy.

Exceed DSCP Value

This field shows the DSCP mark value if this action is markdscp.

Exceed IP

This field shows the IP Precedence mark value if this action is

Precedence Value

 

markprec.

Non-Conform Action

The current setting for the action taken on a packet considered to

 

not conform to the policing parameters. This is not displayed if

 

policing not in use for the class under this policy.

Non-Conform DSCP Value

This field displays the DSCP mark value if this action is markd-

 

scp.

 

 

9-32

CLI Commands: Differentiated Services

Page 210
Image 210
NETGEAR L3 manual Denotes the mark/re-mark value used as the Dscp for traffic