7000 Series L3 Managed Switch Reference Manual for Software v2.0

Format

config ip interface mtu <slot.port> <576-

 

1500>

config ip interface netdirbcast

This command enables or disables the forwarding of network-directed broadcasts.

The value for <mode> is either enable or disable. When enabled, network directed broadcasts are forwarded. When disabled they are dropped.

Default

enable.

Format

config ip interface netdirbcast <slot.port>

 

<enable/disable>

config ip interface create

This command configures an IP address on an interface.

The value for <ipaddr> is the IP Address of the interface.

The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask of the interface. This changes the label "IP address" in "Show IP Interface."

Format

config ip interface create <slot.port>

 

<ipaddr> <subnetmask>

config ip interface delete

This command deletes an IP address from an interface.

The value for <ipaddr> is the IP Address of the interface.

The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask of the interface.

Format

config ip interface delete <slot.port>

 

<ipaddr> <subnetmask>

show ip summary

This command displays all the summary information of the IP. This command takes no options.

Routing Commands

8-5

Page 145
Image 145
NETGEAR L3 manual Config ip interface netdirbcast, Config ip interface create, Config ip interface delete, Show ip summary