7000 Series L3 Managed Switch Reference Manual for Software v2.0

config garp gmrp adminmode

This command enables or disables GARP Multicast Registration Protocol (GMRP) on the system. The default value is disable.

Format

config garp gmrp adminmode <enable/disable>

config garp gmrp interfacemode

This command enables or disables GARP Multicast Registration Protocol on a selected interface. The <slot.port> parameter identifies the interface on which to configure the mode. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a LAG, GARP functionality will be disabled on that interface. GARP functionality will subsequently be re- enabled if routing is disabled and LAG membership is removed from an interface that has GARP enabled.

Default

disable

Format

config garp gmrp interfacemode <slot.port/all>

 

<enable/disable>

config garp gvrp adminmode

This command enables or disables GVRP.

Default

disable

Format

config garp gvrp adminmode <enabledisable>

config garp gvrp interfacemode

This command enables or disables GVRP (GARP VLAN Registration Protocol) for a specific port. If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect.

Default

disable

Format

config garp gvrp interfacemode

 

<slot.portall> <enabledisable>

Switching Commands

7-39

Page 93
Image 93
NETGEAR L3 manual Config garp gmrp adminmode, Config garp gmrp interfacemode, Config garp gvrp adminmode, Disable