7000 Series L3 Managed Switch Reference Manual for Software v2.0

 

 

 

The SNMPv3 access mode may be different than the CLI and

 

Web access mode.

Authentication

This field displays the authentication protocol to be used for the

 

specified login user.

Encryption

This field displays the encryption protocol to be used for the

 

specified login user.

config users add

This command adds a new user (account) if space permits. The account <name> is up to eight alphanumeric characters. The <name> is not case-sensitive.

Six user names can be defined.

 

Format

config users add <name>

config users passwd

This command changes the password of an existing operator. The password is up to eight alphanumeric characters. The name and password are not case-sensitive.

When a password is changed, a prompt will ask for the operator’s former password. If none, press enter.

Default

Blank (indicating no password)

Format

config users passwd <user>

config users delete

This command removes an operator.

Format

config users delete <name>

Note:

The admin user account cannot be deleted.

config users snmpv3 authentication

This command specifies the authentication protocol to be used for the specified login user. The valid authentication protocols are none, md5 or sha. If md5 or sha are specified, the user login password will be used as the snmpv3 authentication password. The <user> is the login user name for which the specified authentication protocol will be used.

Switching Commands

7-61

Page 115
Image 115
NETGEAR L3 manual Config users add, Config users passwd, Config users delete, Config users snmpv3 authentication