7000 Series L3 Managed Switch Reference Manual for Software v2.0

This command can be issued at any time, but is only meaningful within the context of one of the police simple, singlerate, or tworate command attributes defined for this class instance.

Format

config diffserv policy police action conform send

 

<policyname> <classname>

Policy Type

In

config diffserv policy police action exceed drop

This command sets the action taken on excess traffic to drop for the police command (singlerate, tworate) currently configured for the specified class in this policy. The <policyname> and <classname> are the names of an existing DiffServ policy and class, respectively.

This command can be issued at any time, but is only meaningful within the context of one of the police singlerate or tworate command attributes defined for this class instance.

Format

config diffserv policy police action exceed drop <pol-

 

icyname> <classname>

Policy Type

In

config diffserv policy police action exceed markdscp

This command sets the action taken on excess traffic to markdscp for the police command (singlerate, tworate) currently configured for the specified class in this policy. The <policyname> and <classname> are the names of an existing DiffServ policy and class, respectively.

A<dscpval> value is required and is specified as either an integer from 0 to 63, or symbolically through one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32,

af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.

This command can be issued at any time, but is only meaningful within the context of one of the police singlerate or tworate command attributes defined for this class instance.

Format

config diffserv policy police action exceed markdscp

 

<policyname> <classname> <dscpval>

Policy Type

In

CLI Commands: Differentiated Services

9-21

Page 199
Image 199
NETGEAR L3 manual Config diffserv policy police action exceed drop, Config diffserv policy police action exceed markdscp