7000 Series L3 Managed Switch Reference Manual for Software v2.0

config trapflags ospf

This command enables or disables OSPF traps.

Default

enable

Format

config trapflags ospf <enabledisable>

config router ospf adminmode

This command sets the administrative mode of OSPF in the router to active or inactive.

Default

disable

Format

config router ospf adminmode <enabledis-

 

able>

config router ospf asbr

This command determines whether the router can act as an autonomous system border router.

Default

disable

Format

config router ospf asbr <enabledisable>

config router ospf preference

This command sets the route preference value of OSPF in the router. Lower route preference values are preferred when determining the best route. The type of OSPF can be intra, inter, type-1, or type-2. The range of preference is 0 to 255.

Default

Intra -- 8; Inter -- 10; Type-1 -- 13; Type-2 -- 150.

Format

config router ospf preference <intra/inter/

 

type1/type2> <0-255>

show router ospf interface info

This command displays the information for the IFO object or virtual interface tables.

Format

show router ospf interface info <slot.port>

IP Address

Represents the IP address for the specified interface. This is a

 

configured value.

 

 

Routing Commands

8-9

Page 149
Image 149
NETGEAR L3 Config trapflags ospf, Config router ospf adminmode, Config router ospf asbr, Config router ospf preference