NETGEAR L3 manual Config spanningtree adminmode, Config spanningtree forceversion

Models: L3

1 271
Download 271 pages 24.76 Kb
Page 104
Image 104

7000 Series L3 Managed Switch Reference Manual for Software v2.0

MST Instances

List of all multiple spanning tree instances configured on the

 

switch

config spanningtree adminmode

This command sets the spanningtree operational mode. While disabled, the spanningtree configuration is retained and can be changed, but it is not activated.

Default

disable

Format

config spaningtree adminmode <enable/dis-

 

able>

config spanningtree forceversion

This command sets the Force Protocol Version parameter to a new value. The <version> can be one of the following:

802.1d - ST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1d functionality supported)

802.1w - RST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1w functionality supported)

802.1s - MST BPDUs are transmitted (IEEE 802.1s functionality supported)

Default

802.1s

Format

config spanningtree forceversion <802.1d/

 

802.1w/802.1s>

config spanningtree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that this switch is currently using. The <name> is a string of at most 32 characters.

Default

The base MAC address displayed using hexadecimal notation as

 

specified in IEEE 802 standard.

Format

config spanningtree configuration name

 

<name>

7-50

Switching Commands

Page 104
Image 104
NETGEAR L3 manual Config spanningtree adminmode, Config spanningtree forceversion, Config spanningtree configuration name