7000 Series L3 Managed Switch Reference Manual for Software v2.0

Table 6-4.

Quick Start Up IP Address

 

 

 

Command

 

Details

 

 

 

 

 

Burned in MAC Address - The Burned in MAC Address used for

 

 

in-band connectivity

 

 

 

 

 

Locally Administered MAC Address - Can be configured to allow

 

 

a locally administered MAC address

 

 

 

 

 

MAC Address Type - Specifies which MAC address should be

 

 

used for in-band connectivity

 

 

 

 

 

Network Configurations Protocol Current - Indicates which

 

 

network protocol is being used

 

 

Default is DHCP

 

 

 

 

 

Java Mode - Specifies whether the switch should allow the Java

 

 

applet to show the interactive switch graphic (see “Interactive

 

 

Switch Image” on page 4-4)

 

 

Default is enable

 

 

config network parms

config network parms <ipAddr> <Mask> <gateway>

 

 

IP Address range from 0.0.0.0 to 255.255.255.255

 

 

 

 

 

Subnet Mask range from 0.0.0.0 to 255.255.255.255

 

 

 

 

 

Gateway Address range from 0.0.0.0 to 255.255.255.255

 

 

 

Uploading from Switch to Out-of-Band PC (Only XMODEM)

Table 6-5. Quick Start Up Uploading from Switch to Out-of-Band PC (Only XMODEM)

Command

Details

 

 

transfer upload mode xmodem

Changes mode to xmodem which is initiated by the

 

serial EIA 232 port

6-4

Quick Startup

Page 46
Image 46
NETGEAR L3 manual Uploading from Switch to Out-of-Band PC Only Xmodem, Switch Image on