7000 Series L3 Managed Switch Reference Manual for Software v2.0

config lag deletelag

This command deletes an existing lag from the configuration. The interface is a logical slot and port for a configured LAG. The all option removes all configured LAGs.

Format

config lags deletelag <logical

 

slot.portall>

config lag stpmode

This command sets the STP mode for a specific LAG. This is the value specified for STP Mode on the Port Configuration Menu. 802.1D mode is the default. The interface is a logical slot and port for a configured LAG. The all option sets all configured LAGs with the same option.

Format

config lag stpmode <logical slot.portall>

 

<off802.1dfast>

The mode is one of the following:

802.1d

IEEE 802.1D-compliant STP mode is used

fast

Fast STP mode is used

off

STP is turned off

show vlan summary

This command displays a list of all configured VLANs.

Format

show vlan summary

VLAN ID

There is a VLAN Identifier (VID) associated with each VLAN.

 

The range of the VLAN ID is 1 to 4094.

VLAN Name

A string associated with this VLAN as a convenience. It can be

 

up to 16 alphanumeric characters long, including blanks. The

 

default is blank. VLAN ID 1 always has a name of `Default`. This

 

field is optional.

VLAN Type

What type of VLAN this is. A VLAN can be the Default VLAN,

 

(VLAN ID = 1), a static VLAN, one that is configured and per-

 

manently defined, or a Dynamic VLAN, one that is created by

 

GVRP registration. In order to change a VLAN from Dynamic to

 

Static, select Static from the Vlan Type pull-down entry field.

 

Once the VLAN is selected, click on Submit. This will change the

 

VLAN type to Static.

 

 

7-30

Switching Commands

Page 84
Image 84
NETGEAR L3 manual Config lag deletelag, Config lag stpmode, Show vlan summary