7000 Series L3 Managed Switch Reference Manual for Software v2.0

Format

config diffserv service remove <in/out> <slot.port/

 

all> <policyname>

Show Commands

The 'show' command set is used in DiffServ to display configuration and status information for:

Classes

Policies

Services

This information can be displayed in either summary or detailed formats. The status information is only shown when the DiffServ administrative mode is enabled; it is suppressed otherwise.

There is also a 'show' command for general DiffServ information that is available at any time.

The CLI command root is show diffserv.

show diffserv class detailed

This command displays all configuration information for the specified class. The <classname> is the name of an existing DiffServ class.

Format

show diffserv class detailed <classname>

 

Class Name

The name of this class.

 

Class Type

The class type (all, any, or acl) indicating how the match criteria

 

are evaluated for this class. A class type of all means every match

 

criterion defined for the class is evaluated simultaneously they

 

must all be true to indicate a class match. For a type of any each

 

match criterion is evaluated sequentially and only one need be

 

true to indicate a class match. Class type acl rules are evaluated in

 

a hybrid manner, with those derived from each ACL Rule

 

 

grouped and evaluated simultaneously, while each such grouping

 

is evaluated sequentially.

 

Match Criteria

The Match Criteria fields will only be displayed if they have been

 

configured. They will be displayed in the order entered by the

 

user. These are evaluated in accordance with the class type. The

 

possible Match Criteria fields are: Class of Service, Destination

 

 

CLI Commands: Differentiated Services

9-29

Page 207
Image 207
NETGEAR L3 manual Show Commands, Show diffserv class detailed