7000 Series L3 Managed Switch Reference Manual for Software v2.0

config spanningtree cst port edgeport

This command specifies if a port is an Edge Port within the common and internal spanning tree. This will allow the port to transition to Forwarding State without delay. The <slot.port> is the desired switch port. The edgeport <value> can either be "true" or "false".

Default

false

Format

config spanningtree cst port edgeport

 

<slot.port> <true/false>

config spanningtree mst create

This command adds a multiple spanning tree instance to the switch. The instance <mstid> is a number within a range of 1 to 4094, that corresponds to the new instance ID to be added. The maximum number of multiple instances supported by 7000 Series L3 Managed Switch Software is 4.

Format

config spanningtree mst create <mstid>

config spanningtree mst delete

This command removes a multiple spanning tree instance from the switch and reallocates all VLANs allocated to the deleted instance to the common and internal spanning tree. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance to be removed.

Format

config spanningtree mst delete <mstid>

config spanningtree mst vlan add

This command adds an association between a multiple spanning tree instance and a VLAN. The VLAN will no longer be associated with the common and internal spanning tree. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The <vlan> corresponds to an existing VLAN ID.

Format

config

spanningtree mst vlan add <mstid>

 

<vlan>

 

7-56

Switching Commands

Page 110
Image 110
NETGEAR L3 Config spanningtree cst port edgeport, Config spanningtree mst create, Config spanningtree mst delete, False