7000 Series L3 Managed Switch Reference Manual for Software v2.0

Note: This command is valid only when the Transfer Mode is TFTP. See “transfer download mode” on page 82. Details of the TFTP path are explained under the command transfer upload

path <path>.

Blank

Default

Format

transfer download path <path>

transfer download filename

This command sets the name for the file that is downloaded to the switch. The switch “remembers” the last file name used.

Append the file path to the file name if the string is less than 31 characters. Otherwise, use the transfer download path command, and the File Name will be appended to the File Path as is.

Note: This command is valid only when the Transfer Mode is TFTP. See “transfer download mode” on page 82.

DefaultBlank

Format

transfer download filename <name>

transfer download datatype

This command sets the type of file to download to the switch.

Default

code

Format

transfer download datatype <codeconfig>

transfer download start

This command starts a download transfer after displaying current settings and upon confirmation.

Format

transfer download start

clear transfer

This command resets the file transfer configured values to the factory defaults.

Format

clear transfer

Switching Commands

7-83

Page 137
Image 137
NETGEAR L3 manual Transfer download filename, Transfer download datatype, Transfer download start, Clear transfer, Code