7000 Series L3 Managed Switch Reference Manual for Software v2.0

config router rtrdiscovery lifetime

This command configures the value, in seconds, of the lifetime field of the router advertisement sent from this interface. The range is the maxinterval to 9000 seconds.

Default

3 * maxinterval

Format

config router rtrdiscovery lifetime

 

<slot.port> <maxinterval-9000>

config router rtrdiscovery address

This command configures the address to be used to advertise the router for the interface.

Default

224.0.0.1

Format

config router rtrdiscovery address

 

<slot.port> <ipaddr>

config router rtrdiscovery preference

This command configures the preferability of the address as a default router address, relative to other router addresses on the same subnet. The range is -2147483648 to -1 to 0 to 1 to 2147483647.

Default

0

Format

config router rtrdiscovery preference

 

<slot.port> <-2147483648-2147483647>

show router rtrdiscovery

This command displays the router discovery information for all interfaces, or a specified interface.

Format

show router rtrdiscovery <slot.port/all>

Ad Mode

Displays the advertise mode which indicates whether router dis-

 

covery is enabled or disabled on this interface.

Max Int

Displays the maximum advertise interval which is the maximum

 

time allowed between sending router advertisements from the

 

interface in seconds.

Min Int

Displays the minimum advertise interval which is the minimum

 

time allowed between sending router advertisements from the

 

interface in seconds.

 

 

Routing Commands

8-35

Page 175
Image 175
NETGEAR L3 Config router rtrdiscovery lifetime, Config router rtrdiscovery address, Config router rtrdiscovery preference