7000 Series L3 Managed Switch Reference Manual for Software v2.0

Adv Life

Displays advertise lifetime which is the value of the lifetime field

 

of the router advertisement sent from the interface in seconds.

Preferences

Displays the preference of the address as a default router address,

 

relative to other router addresses on the same subnet.

show router bootpdhcprelay

This command displays the BootP/DHCP Relay information.

Format

show router bootpdhcprelay

Maximum Hop Count

Is the maximum allowable relay agent hops.

Minimum Wait

Is the minimum wait time.

Time (Seconds)

Admin Mode

Represents whether relaying of requests is enabled or disabled.

Server IP Address

Is the IP Address for the BootP/DHCP Relay server.

Circuit Id Option Mode

Is the DHCP circuit Id option which may be enabled or disabled.

Requests Received

Is the number or requests received.

Requests Relayed

Is the number of requests relayed.

Packets Discarded

Is the number of packets discarded.

config router bootpdhcprelay circuitidoptionmode

This command enables or disables the circuit ID option mode for BootP/DHCP Relay on the system. The <mode> parameter has possible values of enable and disable.

Default

disable

Format

config bootpdhcprelay circuitidoptionmode

 

<enabledisable>

config router bootpdhcprelay adminmode

This command enables or disables the forwarding of relay requests for BootP/DHCP Relay on the system. The <mode> parameter has possible values of enable and disable.

The default value is disable.

Format

config bootpdhcprelay adminmode <enable/disable>

8-36

Routing Commands

Page 176
Image 176
NETGEAR L3 manual Show router bootpdhcprelay, Config router bootpdhcprelay circuitidoptionmode