7000 Series L3 Managed Switch Reference Manual for Software v2.0

 

indicates that the router is not eligible to become the designated

 

router on this network.

State

The types are:

 

Down- initial state of the neighbor conversation - no recent infor-

 

mation has been received from the neighbor.

 

Attempt - no recent information has been received from the

 

neighbor but a more concerted effort should be made to contact

 

the neighbor.

 

Init - an Hello packet has recently been seen from the neighbor,

 

but bi-directional communication has not yet been established.

 

2 way - communication between the two routers is bi-directional.

 

Exchange start - the first step in creating an adjacency between

 

the two neighboring routers, the goal is to decide which router is

 

the master and to decide upon the initial DD sequence number.

 

Exchange - the router is describing its entire link state database

 

by sending Database Description packets to the neighbor.

 

Loading - Link State Request packets are sent to the neighbor

 

asking for the more recent LSAs that have been discovered (but

 

not yet received) in the Exchange state.

 

Full - the neighboring routers are fully adjacent and they will now

 

appear in router-LSAs and network-LSAs.

Events

The number of times this neighbor relationship has changed state,

 

or an error has occurred.

Permanence

This variable displays the status of the entry, either dynamic or

 

permanent. This refers to how the neighbor became known.

Hellos Suppressed

This indicates whether Hellos are being suppressed to the neigh-

 

bor. The types are enabled and disabled.

Retransmission

Is an integer representing the current length of the retransmission

Queue Length

 

queue of the specified neighbor router Id of the specified inter-

 

face.

show router ospf neighbor table

This command displays the OSPF neighbor table list. When a particular neighbor ID is specified, detailed information about a neighbor is given. The information below will only be displayed if OSPF is enabled.

Format

show router ospf neighbor table <slot.port>

 

 

8-18

Routing Commands

Page 158
Image 158
NETGEAR L3 manual Show router ospf neighbor table